Product
CAT6A Ultra Thin Patch Cable
CAT6A Ultra Thin Patch Cable
Bandwidth:500MHz
OD:3.7±0.2mm
Bend Radius:10mm
Conductor:28AWG
Appravals:RoHS&REACH
Length,Color,Package:As per your request
Details:
Cat6A Fluke Component (Patch Cord) Test Passed Super Slim OD:3.7mm Patch Cable features very small diameter(OD) at 3.7±0.2mm and very flexible. There is one big difference of this category 6A cable is that the PE cross is not included, but no discount in its performance when compare with the common Cat6A cables. Consists of unshielded 8p8c RJ45 male connector on each end and 4 twisted pairs 28AWG(7/0.12mm) bare copper wires, PVC or LSZH jacket. It is typically used for 10Gigabit Ethernet network connections such as patch panels, switches, computers and routers. It’s ultra-thin cable design works perfectly in high density server room applications. All cables are 100% tested to pass a standard Fluke CAT6A Patch Cord Test and can come with a printed test report if you needed.
Product through train
Product train
0755-29769913
0755-29769915
Product Details
Category | 6A |
Bandwidth, MHz | 500 |
Type of conductors | Stranded |
Diameter of conductors, AWG | 28 (7 x 0.12 ± 0.01 mm) |
Insulation material | Polyethylene (PE) |
Outer jacket material |
PVC/LSZH |
Connection style | Unshielded |
Outer jacket diameter, mm | 3.6 ± 0.02 |
Jacket color | Black, gray, white, blue, green, red, custom |
Compliance | Exceeds the requirements of the standards: ISO / IEC 11801, EN 50173 and ANSI / TIA-568-C.2 |
Supported applications | 10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, ATM-25, ATM-51, ATM-155, 100VG-AnyLan, TR-4, TR-16 Active, TR-16 Passive |
Temperature ranges | Storage from -20 to +60 ºС. Installation from 0 to +50 ° C. Operation from -20 to +50 ºС |
Individual packing | PE bag |
Layout diagram | T568B on both ends |
Connector type | 2xRJ45/8P8C |
Contact plating | Gold, 50 micro-inches |
Protective cap | Gelled, with latch protection |
Cable type | U/UTP |
Number of pairs | 4 |