CAT6A Ultra Thin Patch Cable

CAT6A Ultra Thin Patch Cable

Bandwidth:500MHz

OD:3.7±0.2mm

Bend Radius:10mm

Conductor:28AWG

Appravals:RoHS&REACH

Length,Color,Package:As per your request

Details：

Cat6A Fluke Component (Patch Cord) Test Passed Super Slim OD:3.7mm Patch Cable features very small diameter(OD) at 3.7±0.2mm and very flexible. There is one big difference of this category 6A cable is that the PE cross is not included, but no discount in its performance when compare with the common Cat6A cables. Consists of unshielded 8p8c RJ45 male connector on each end and 4 twisted pairs 28AWG(7/0.12mm) bare copper wires, PVC or LSZH jacket. It is typically used for 10Gigabit Ethernet network connections such as patch panels, switches, computers and routers. It’s ultra-thin cable design works perfectly in high density server room applications. All cables are 100% tested to pass a standard Fluke CAT6A Patch Cord Test and can come with a printed test report if you needed.

Product through train

Product train

Service Hotline：

0755-29769913
0755-29769915

Product Details

Category	6A
Bandwidth, MHz	500
Type of conductors	Stranded
Diameter of conductors, AWG	28 (7 x 0.12 ± 0.01 mm)
Insulation material	Polyethylene (PE)
Outer jacket material	PVC/LSZH
Connection style	Unshielded
Outer jacket diameter, mm	3.6 ± 0.02
Jacket color	Black, gray, white, blue, green, red, custom
Compliance	Exceeds the requirements of the standards: ISO / IEC 11801, EN 50173 and ANSI / TIA-568-C.2
Supported applications	10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, ATM-25, ATM-51, ATM-155, 100VG-AnyLan, TR-4, TR-16 Active, TR-16 Passive
Temperature ranges	Storage from -20 to +60 ºС. Installation from 0 to +50 ° C. Operation from -20 to +50 ºС
Individual packing	PE bag
Layout diagram	T568B on both ends
Connector type	2xRJ45/8P8C
Contact plating	Gold, 50 micro-inches
Protective cap	Gelled, with latch protection
Cable type	U/UTP
Number of pairs	4

Product